Télécharger Imprimer la page

Kenwood DF320 Serie Mode D'emploi page 4

Masquer les pouces Voir aussi pour DF320 Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
know your Kenwood deep fryer
safety
Never plug in the fryer before filling the bowl with oil.
G
Keep children away during use and after - fat stays hot
G
for a long time.
Never let the cord touch hot surfaces or hang down
G
over the worktop edge - a child could grab it and pull
the fryer down.
Never touch the bowl, pour away oil or move your fryer
G
while the oil's hot.
After cleaning, ensure all parts are completely dry
G
before use.
Never leave your fryer on unattended.
G
Do not use if there is any damage to the fryer, cord or
G
plug. Get it checked or repaired: see 'service'.
Watch out for steam during cooking and when you
G
open the lid.
Never put your fryer near or on cooker hot plates.
G
Always unplug the fryer after use.
G
This appliance is not intended to be operated by
G
means of an external timer or separate remote-control
system.
This appliance is not intended for use by persons
G
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do
G
not play with the appliance.
Only use the appliance for its intended domestic use.
G
Kenwood will not accept any liability if the appliance is
subject to improper use, or failure to comply with these
instructions.
before plugging in
Make sure your electricity supply is the same as the
G
one shown on the underside of the fryer.
This appliance conforms to EC directive 2004/108/EC
G
on Electromagnetic Compatibility and EC regulation no.
1935/2004 of 27/10/2004 on materials intended for
contact with food.
before using for the first time
1 Remove all packaging.
2 Dismantle: see 'to dismantle, assemble and use your
fryer'.
3 Wash the parts: see 'cleaning'.
All manuals and user guides at all-guides.com
know your Kenwood fryer
to dismantle, assemble and use
your fryer
1 Push the lid release
2 Lift up the handle and remove the basket.
1 Pour in the oil. The level must be between the 'MAX'
2 Insert the basket and lower the handle by sliding the
3 Plug in and select the required temperature
4 The light goes out when the oil reaches the right
5 When ready open the lid and raise the basket. To drain
G
G
2
removable lid with permanent mesh filter
viewing window
basket
handle lever
folding handle
basket rest
pouring lip (L)
fixed bowl
lid release
body
temperature control with neon light
to dismantle
down to open the lid. Then lift
the lid off.
to assemble and use
and 'MIN' marks.
lever
forward. Close the lid.
temperature to start frying. Fill the basket and lower
into the oil. Don't exceed the maximum food
quantities stated. The light will come on and off as
the fryer maintains the temperature.
the food hook the basket rest
bowl
.
To re-use oil, allow to cool then pour the oil through fine
muslin or absorbent paper.
Always unplug the fryer after use.
.
on the side of the

Publicité

loading