Télécharger Imprimer la page

Cameo F4 FC PO IP65 Manuel D'utilisation page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
SLAVE MODE
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
to select the "Slave" menu item (as indicated by selector arrow on left) and confirm by pressing the encoder (ENTER). Slave mode is now
activated and the main display is automatically shown again. Connect the slave and master unit (same model, same software version) using
a DMX cable, and activate one of the stand-alone modes on the master unit. The slave unit will now follow the master unit.
currently activated mode
Press encoder =
select mode
DMX MODE
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
to select the "DMX" menu item (as indicated by selector arrow on left) and confirm by pressing the encoder (ENTER). DMX mode is now
activated and the main display is automatically shown again. Select one of the ten available DMX modes in the menu item "DMX Mode" in
the main menu (see SET DMX MODE).
DEVICE SETTINGS (Settings)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to select
"Settings" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). This will take you to the submenu
for setting the submenu options (see table, select via SELECT, confirm via ENTER, change value or status via SELECT, confirm via ENTER).
Settings
Display Flip
=
Display Time off
=
DMX Fail
=
Standing Position
Display rotation
Hanging Position
Display always on
Display lighting
Display off after 20s
Hold
Operational status with
Blackout
DMX signal fault
User Color 8
Fan mode
Press encoder =
Open main menu
No rotation of the display
Display is rotated by 180° (e.g. for overhead installation)
Permanently on
Deactivates after approximately 20 seconds of
inactivity
Last command is retained
Activates blackout
Activates User Colour 8
11

Publicité

loading

Ce manuel est également adapté pour:

Clf4fcpoip