Télécharger Imprimer la page

Connecting To A Tv; Maintenance And Cleaning; Disposal - VOLTCRAFT BS-250XWSD Mode D'emploi

Endoscope
Masquer les pouces Voir aussi pour BS-250XWSD:

Publicité

1.
INTRODUCTION
Chère cliente, cher client,
En choisissant un produit Voltcraft®, vous avez choisi un produit d'une qualité exceptionnelle, ce dont
nous vous remercions vivement.
Voltcraft® - Ce nom est en effet garant d'une qualité au dessus de la moyenne dans les domaines de
la mesure, de la recharge ainsi que des appareils de réseau, tous se distinguant par leur compétence
technique, leur fi abilité, leur longévité et une innovation permanente.
Que vous soyez des électroniciens amateurs ambitionnés ou des utilisateurs professionnels, vous
trouverez dans les produits de la famille Voltcraft® des appareils vous mettant à disposition la solution
optimale pour les tâches les plus exigeantes. Et notre particularité : Nous pouvons vous offrir la
technique éprouvée et la qualité fi able des produits Voltcraft® à des prix imbattables du point de
vue rapport qualité/prix. Ainsi, nous mettons à votre disposition des produits aptes à satisfaire vos
exigences les plus pointues.
Nous vous souhaitons beaucoup de plaisir avec votre nouvel appareil Voltcraft® !
Tous les noms de société et toutes les désignations de produit sont des marques déposées de
leurs propriétaires respectifs. Tous droits réservés.
28
Connecting the display unit to a PC is also possible, if the display unit has been detached
from the endoscope. However, do not connect the endoscope base unit to a PC if you
have previously dismounted the display from the endoscope.
16.

CONNECTING TO A TV

1.
First, set the video output format (see section "Settings").
2.
Open the cover on the right side of the monitor.
3.
Connect the video cable jack with the matching socket on the endoscope and connect the cinch
plug with the video input of the TV set.
4.
This will make the image on the display go off, and the camera image will then be displayed on
the TV screen.
17.

MAINTENANCE AND CLEANING

The device requires no servicing on your part apart from occasional cleaning. Only use a soft,
anti-static and lint-free cloth for cleaning.
Do not use abrasive or chemical cleaners.
Flush the gooseneck camera thoroughly with clean water after each use in liquids and dry it off
before returning it to the case.
To clean the camera lens, use a small brush or cotton swab.
18.

DISPOSAL

Product
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from the
product.
(Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable
batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries,
e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfi l your statutory obligations and contribute to the protection of the environment.
25

Publicité

Chapitres

loading