Publicité
Les langues disponibles
Les langues disponibles
Configuration switches
The configuration switches are on the back of the
thermostat. The factory settings are indicated by the
gray cells in the following table.
1
Keypad lock
2
Cycle length
3
Temperature display format
a.
The settings are locked. The temperature adjustment buttons
only allow you to view the temperature setpoint.
b.
Select short cycles in most cases as it provides better
temperature control. However, you must select long cycles if
you have a fan-forced heater.
are selected.
69-2793EF—05
Switches
a
b
is displayed when long cycles
8
Off
On
Short
Long
°C
°F
Publicité
