Before Initial Use; Preparation Of The Mini Sewing Machine; Inserting Batteries - easymaxx 04135 Mode D'emploi

Before Initial Use

PLEASE NOTE!
■ Keep children and animals away from the packaging material. There is a danger of
suffocation!
1. Unpack all parts and check the items supplied for completeness (see the"Items Sup-
plied and Device Overview" chapter) and possible transport damage. If you fi nd any
damage to the components, do not use the device (!), but contact our customer ser-
vice department.
2. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.

Preparation of the Mini Sewing Machine

PLEASE NOTE!
■ Make sure the device is switched off before performing all preparatory activities. The
Ein / Stand-by button must not be depressed and there must not be anything resting
on the foot control!
You can either connect the Mini Sewing Machine to the mains power or operate it using
batteries. For battery mode, the batteries need to be inserted fi rst.

Inserting Batteries

For battery mode, you require 4 x 1.5 V AA batteries. These are not supplied with the
device.
• Always have spare batteries available and replace the batteries when the perfor-
mance of the sewing machine begins to diminish.
• If you do not use the device for a lengthy period of time, remove the batteries in order
to prevent them from leaking.
23
1. The battery compartment cover is located on the bottom
of the device. Open it by pressing the catch towards the
cover and lifting up the lid at the same time.
2. Insert 4 x 1.5 V AA batteries. Pay attention to the correct
polarity (+ / –).
3. Replace the battery compartment cover and slide it shut. It
must engage audibly.
EN