Classification Of The Warnings En; Warning And Notice Signs En; Emergency Information En; Product Description - Abicor Binzel CR1000 Mode D'emploi

3 Product description

2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different categories and are indicated prior to potentially
dangerous work steps. Arranged in descending order of importance, they have the following meanings:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk that could result in impaired work or material damage to the equipment.
2.5 Warning and notice signs
The following warning and notice signs can be found on the product:
Symbol
These markings must always be legible. They must not be covered, obscured, painted over or removed.
2.6 Emergency information
In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
Further measures can be found in the operating instructions for the power source or the documentation for other peripheral
devices.
3 Product description
The cooling unit is used for cooling liquid-cooled welding torches.
Any other use is considered improper. The manufacturer cannot be held liable for any damage arising from such use.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorisation.
• Only qualified personnel are permitted to perform work on the device or system.
EN - 4
Meaning
Read and observe the operating instructions!
CR1000/CR1250
BAL.0351.0 • 2020-06-10