Qilive Q.6822 Manuel D'utilisation page 12

6. DOOR REVERSAL
EN
1. Make sure that your refrigerator is unplugged.
2. Remove the hinge cover and upper hinge from the top right side of the cabinet.
Remove the screw hole cover from the top left side of the cabinet.
3. Remove the freezer compartment door from the cabinet.
4. Remove the screws that secure the lower hinge to the right side of the cabinet,
then remove the hinge. Remove the adjustable foot on the left side.
5. Remove the adjustable foot on the lower hinge shaft, and remove the washer and
nut.
6. Turn the lower hinge by 180°.
7. Install the washer and nut into the hole on the pin shaft, and then install the
adjustable foot.
Hole cover
Adjustable
foot
Hinge cover
Screws
Upper hinge
Lower hinge
Screws
Pin shaft
Washer
Nut
Adjustable foot
12