Connecting Mhl Device; 3: Preventing The Tv From Toppling Over - Sony BRAVIA KDL-42W674A Mode D'emploi

Masquer les pouces Voir aussi pour BRAVIA KDL-42W674A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connecting MHL device

Use authorized
MHL2 cable with
MHL logo
(not supplied)
The MHL (Mobile High-Definition Link) enables
the TV to communicate with a connected
MHL-compatible device. The TV can charge the
connected MHL-compatible device while
playing photo/music/video from it. You can use
the TV remote control to control the connected
MHL-compatible device.
~
• If "Auto Input Change (MHL)" is set to "On", the
TV automatically switches to HDMI IN 2/MHL
from other input when MHL-compatible device is
connected to HDMI IN 2/MHL jack. The
availability of "Auto Input Change (MHL)"
depends on whether the MHL-compatible device
can support this feature.
• You can continue normal usage of the connected
MHL-compatible device (such as receiving calls)
depending on its capability.
• Some remote control functions may not be
available depending on features of the
connected MHL-compatible device. Please refer
to the device manual for details.
• If "MHL Charging during Standby" is set to "On",
you can continue charging the MHL-compatible
device even when the TV is in standby mode.
• This product is officially MHL-certified for
operation with other MHL-certified devices. If you
encounter any problems when using the MHL
function, please consult the device manufacturer
for support.
10
GB
3: Preventing the
MHL device
~
• Before install the machine screw, lay the display
• To prevent damaging the surface of the LCD
1
2
TV from
toppling over
Soft cloth
face down on a stable work surface that is larger
than the TV.
display, make sure to place a soft cloth on the
work surface.
Install a machine screw (M4, not supplied)
into the screw hole of the TV and tie with a
strong cord (not supplied).
Install a wood screw (not supplied) in the TV
stand. Then, tie the strong cord to the wood
screw.
The length of the M4 machine screw differs
depending on the cord diameter.
Please see below illustration.
6-8 mm
1
Screw M4
Cord
TV's Table-Top
Stand

Publicité

Chapitres

Table des Matières
loading

Table des Matières