Atlantic DORIS Notice D'utilisation Et D'installation page 27

Commands
No current
Received
Oscilloscope
Ref/Neutral
Mode
COMFORT
obtained
To retain the performance of the device, it is necessary about twice a
year to carry out dust removal using a vacuum cleaner or a brush at
the air inlets and outlets. Every five years, have the inside of the device
checked by a professional electrician. The outside of the device can be
cleaned with a damp cloth.
Never use abrasive products or solvents
Clean the air inlet and outlet grilles with a vacuum cleaner.
The fan is equipped with a dust filter which, when it is full, can cause it
to stop (an error code Err 6 is displayed on the control panel display).
For best use, clean your filter regularly.
You have two hooks.
Complete
altermation
230 V
ECO
MAINTENANCE
CLEANING THE FAN
USING THE HOOKS
24
Negative
Half/altermation
– 115V
ANTI - FREEZE
.
Positive
Half/altermation
+ 115V
STOP HEATING
LOAD SHEDDING