Hikmicro LYNX Serie Guide Demarrage Rapide page 5

1. Appearance (Page 1 – A)
Buttons and Components
No. Component
1 Power
2 Capture
3 Mode
4 Zoom
5 Eyepiece
Diopter
6 Adjustment
Knob
7 Tripod Mount
8 Cable Interface
Battery Status
9
Indicator
10 Lens Cover
Function
● Press: Standby mode/wake up device
● Hold: Power on/off
Non-Menu Mode:
● Press: Capture pictures
● Hold: Start/stop recording
Menu Mode: Press to move up.
Non-Menu Mode:
● Press: Enter the quick menu
● Hold: Enter the main menu
Menu Mode:
● Press: Confirm/set parameters
● Hold: Save and exit settings
Non-Menu Mode:
● Press: Switch digital zoom
● Hold: Correct non-uniformity of display (FFC)
Menu Mode: Press to move down.
The piece placed closest to the eye to view the
target.
Adjusts the dioptric setting.
Mounts the tripod.
To connect the device to power supply or
transmit data with a type-C cable.
● Flashing Red & Green: Error occurred.
● Solid Red: Battery is properly charged.
● Solid Green: Battery is fully charged.
● Off: Battery is not charged.
Protects the lens from dust or scratch.
3
English