Publicité
Les langues disponibles
Les langues disponibles
troubleshooting
dries unevenly.
has an odor.
shuts off before load is dry
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Dryer.
CODE SYMBOL MEANING
For any codes not listed above, call 1-800-360-2742.
26_ Troubleshooting
BED70W-02486B_EN.indd 26
•
Seams, pockets, and other similarly heavy areas may not be
completely dry when the rest of the load has reached the selected
dryness level. This is normal. Select the More Dry setting if desired.
•
If one heavy item is dried with a lightweight load, such as one towel
with sheets, it is possible that the heavy item will not be completely
dry when the rest of the load has reached the selected dryness level.
Sort heavy items from lightweight items for best drying results.
•
Household odors from painting, varnishing, strong cleaners, etc.
may enter the dryer with the surrounding room air. This is normal as
the Dryer draws the air from the room, heats it, pulls it through the
tumbler, and exhausts it outside.
•
When these odors linger in the air, ventilate the room completely
before using the Dryer.
•
Dryer load is too small. Add more items or a few towels and restart
the cycle.
•
Dryer load is too large. Remove some items and restart the dryer.
Heater temperature control
problem.
Door open sensing problem.
Door open error. When the door is
open, the dryer will not operate.
SOLUTION
Call for service. See below.
Call for service. See below.
Be sure the door is latched shut. If problem
continues, call for service. See below.
2008-01-09 ¿ÀÈÄ 6:53:24
Publicité
