Publicité
Les langues disponibles
Les langues disponibles
Faults table
Problem
Excessive ice formation. •
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
26
Cause/Solution
depends on the installation of the appliance, its correct use and its
age.
•
When you connect the appliance to the power supply the noise made
by the compressor or flowing refrigerant may be slightly louder. This
is not indicative of a defect, and has no effect on the service life of
the appliance. The appliance will make less noise after a while.
•
The appliance may be temporarily noisier after the door has been
opened for too long or too frequently, a large quantity of fresh food
has been put in the appliance or the intensive freezing or intensive
cooling function has been activated.
The door is not closed properly.
•
The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Publicité
