Publicité
Les langues disponibles
Les langues disponibles
Operating the appliance
Intensive cooling (SuperCool)
This appliance has an intensive cooling function. This function decreases the temperatures in the
refrigeration compartment as quickly as possible. Activate this function 24 hours before you put a
large quantity of fresh food in the appliance.
INFORMATION!
When the intensive cooling function is selected, the appliance works at maximum capacity. It
may then make more noise for a while.
INFORMATION!
Adjusting the temperature of the refrigeration compartment while the intensive cooling function
is activated will immediately disable the intensive cooling function.
INFORMATION!
When the intensive cooling function is not manually disabled then the function will be automatically
disabled after about six hours. The temperature then returns to the latest temperature setting.
18
•
Adjust the temperature as desired using the A key.
•
Press the A key (several times) until the desired temperature
indicator lights up.
•
When the A key is pressed for the first time, the currently set value
or function will start to flash. Every successive time you press the
A key, the settings indicator will move to the next setting (from right
to left, in a circular manner).
•
After three seconds, the setting will stop flashing. Your setting will
be stored and the corresponding indicator will be continuously lit.
The numbers 2, 4, 6 and 8 indicate the degrees Celsius (°C) in the
refrigerator compartment.
•
The recommended temperature setting is +4 °C. At this temperature,
food quality and freshness are preserved longer.
•
If the ambient temperature in the room where the appliance is
installed is below 16 °C, we recommend setting a temperature lower
than 4 °C.
•
To activate the intensive cooling function, press the A key several
times until symbol C lights up.
•
To switch off the intensive cooling function, press the A key to select
the desired temperature B.
Publicité
