Publicité
Les langues disponibles
Les langues disponibles
3. OPERATION
Note: If connect Wi-Fi failure,
please try to reset WIFI module and
connect it again.
7.2) There are three methods to reset the WIFI
module:
A) Press the
" button on the control panel
6 times within 4 seconds. Every time reset the
Wi-Fi, must wait about 10 seconds, then the
screen will display "CF" or "AP" 5 times.
B) Hold the
button on the control panel
about 5 seconds.
C) Hold the
button on the control panel
about 3 seconds.
8) AP mode
: Follow the steps:
8.1) You can see the percent rate of connecting
process, at the same time "PP", "SA", "AP"
shining in turn on the appliances display.
"PP" means "Searching the router" / "SA"
means "connected to the router" / "AP" means
"connected to the server"
TAC-23WC
UK
Note: If
UK
connect Wi-Fi
failure, please
try to reset
WIFI module
and connect it
again.
45
Publicité
