Publicité
Les langues disponibles
Les langues disponibles
2. INSTALLATION
UK
The window slider kit has been designed to fit most standard vertical and horizontal window
applications,however, it may be necessary for you to modify some aspects of the installation
procedures for certain types of windows. The window slider kit can be fastened with screws.
NOTE:
If the window opening is less than the minimum length of the window slider kit, cut the end
without the hold in it short enough to fit in the window opening. Never cut out the hole in window
slider kit.
Cut on opposite side of hole
WINDOW SLIDER KIT INSTALLATION
1: Parts:
A) Panel
B) Panel with one hole
C) Screw to lock window kit in place
2. Assembly: Slide Panel B into Panel A and size to widow width. Windows sizes vary. With the
width that your window requires to ensure that there are no gaps or air pockets in the window kit
assembly after installation.
UK
3. Lock the screw into the hole that correspond.
TAC-23WC
33
Publicité
