Publicité
Les langues disponibles
Les langues disponibles
3. OPERATION
UK
* Programming shut down
- When the appliance is running, press the "
", l button, the screen starts to flash.
- Press the "
"/ "
" to adjust the set time from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the " Timer" symbol lights.
- Press the "
" " button again to cancel the Timer, and the " Timer " symbol disappear.
* Switch the unit of temperature
When the appliance is running, hold on "
" and "
" button together 3 seconds by the same
time, then you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fig 1 (ºC).
After change, in cool mode, the screen display like fig 2 (ºF).
3.6 SMART MODE
The appliance chooses automatically whether to operate in cool or fan mode.
To set this mode correctly:
● Press the
button a number of times until the screen show like below:
● Select the required fan speed by pressing the
button.
Three speeds are available:High / Low / Auto.
If the appliance is cooling only model, the unit operates in Fan mode when the room temperature is
below 23℃ (73℉), and Cool mode when the room temperature is above 23℃(73℉).
3.7 SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
TAC-23WC
36
Publicité
