Publicité
Les langues disponibles
Les langues disponibles
CLEANING
GRILLE REMOVAL (MODELS 360 & 460)
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing grille.
1. Feel for bumps on back of prod-
uct, close to inlets, that help to
locate screws at roughly 12, 3, 6
and 9 o'clock positions. Remove
the 4 screws located at these
positions, releasing the grille.
2. Dust or wash Front Grille with a
mild dishwashing soap. Do not
Screw
place grille in the dishwasher.
The excessive heat can distort
the plastic.
3. To reattach - position the Front
Grille so the Vornado logo in
the center of the Front Grille is
straight. Replace all the screws.
Use the brush attachment on your
household vacuum cleaner to
vacuum any accumulated dust off
the Front Grille and Air Inlets.
12 English
Screwdriver required.
Screw
Note: The motor is
permanently lubricated
and requires no oiling.
Screw
CLEANING
GRILLE REMOVAL (MODELS 660)
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing grille.
1. To release the Front Grille, remove the
4 screws on the back of the inlet grille,
located at roughly 2, 5, 7 and 10 o'clock
positions.
2. Dust or wash Front Grille with a mild
dishwashing soap. Do not place grille in
the dishwasher. The excessive heat can
distort the plastic.
Screw
3. To reattach - position the Front Grille
so the Vornado logo in the center of the
Front Grille is straight. Replace all the
screws.
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grille and Air Inlets.
Screwdriver required.
Screw
Screw
Screw
Note: The motor
is permanently
lubricated and
requires no oiling.
Screw
13
English
Publicité
