Beyerdynamic STEGOS Guide De Démarrage Rapide page 19

All manuals and user guides at all-guides.com
Stegos – Quick Start Guide
3. First of all you must find all Stegos TB boundary microphones where "Auto Lock" is ticked in the
Stegos software.
3.1 Tick the "Auto Lock" tick box.
3.2 Select any RF band (e.g. Low) and wait a few seconds until all Stegos TB boundary microphones
that are set to "Low" are connected.
3.3 If all requested Stegos TB boundary microphones are connected to this receiver, you can skip
the next steps.
3.4 Set the Stegos RS receiver to another RF band (e.g. Mid) and wait a few seconds until all
Stegos TB boundary microphones that are set to "Mid" are connected.
3.5 If all requested Stegos TB boundary microphones are connected to this receiver, you can skip
the next steps.
3.6 Set the Stegos RS receiver to the last RF band (e.g. High) and wait a few seconds until all
Stegos TB boundary microphones that are set to "High" are connected.
3.7 Now all requested Stegos TB boundary microphones should be connected to this receiver on one
of the RF bands. With activated "Auto Lock".
4. Select the final RF band. All connected Stegos TB boundary microphones will move to this RF band,
as the "Auto Lock" function is still activated. Wait a few seconds until all microphones are connected
to the final RF band.
5. Remove the tick from the "Auto Lock" tick box.
6. Now the Stegos TB boundary microphones will connect to the last RF band and are allocated to this
receiver.
7. Turn on the first Stego RS receiver and the appropriate Stegos TB boundary microphones.
8. Proceed with the second and third Stegos RS receiver and the appropriate Stegos TB boundary
microphones as described item 1 to 7.
Important:
Now all Stegos TB boundary microphones are allocated to determined RF bands and connected to the
appropriate Stegos RS receiver in this RF band. In this way up to three Stegos system can be operated
simultaneously. The boundary microphones cannot be exchanged with the receivers ("Auto Lock" is
deactivated), as they are allocated to a determined receiver (RF band).
Disposal
• Old batteries may contain substances that are harmful to your health and environment.
• The device provides built-in rechargeable batteries, which you cannot remove yourself, therefore,
return the device to your dealer for recycling when the batteries are exhausted.
• All batteries are recycled to reclaim valuable material such as iron, zinc or nickel.
19