Hoover HMG201X-80 Instructions D'installation page 3

Please Read the Manual Carefully Before Installation
ADJUST SCREW A
SCREW B
TRIM-KIT PLASTIC
COVER
Please Note
Electrical connection
The oven is fitted with a plug and must be only connected to a properly installed earthed
socket. In accordance with the appropriate regulations, the socket must only be installed and
the connecting cable must only be replaced by a qualified electrician.
If the plug is no longer accessible following installation and all-pole isolating switch must
be present on the installation side with a contact gap of at least 3mm.
GB
Installation Instructions
2