Publicité
Les langues disponibles
Les langues disponibles
Wood storage compartment
The wood storage compartment below the combus-
sure. It can be opened by lightly pressing on the but-
ton (Olsberg logo). Likewise it can be closed by light-
ly pressing.
Heating
● Only place the quantity of fuel required to achieve
the heating requirement.
tion chamber is fitted with a magnetic pressure clo-
For a nominal heating output 8 kW:
- max. 2,5 kg billet wood; burning time >45 min
- max. 2 kg wood briquettes; burning time >45 min
- max. 4 lignite briquettes; burning time >60 min
For max. heat output allowed:
- max. 3 kg billet wood
- max. 3 kg wood briquettes
- max. 6 lignite briquettes
● Open the combustion chamber door slowly after
adding new fuel, as otherwise the combustion gas-
es can escape.
● Empty the ash pan or combustion chamber in good
time. Otherwise it is possible for the combustion air
intake to be blocked or for the grate to be damaged.
● Only remove the ash pan to empty it.
● Clean the ash pan compartment regularly after re-
moving the ash pan to remove any ash that may
have been spilled (e.g. use a vacuum cleaner).
Attention:
Any stove and ash residues must have been left to
cool before being removed.
Heating during the transition period
Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
depends on the external temperature. Therefore, if the
external temperatures are high (above 16°C) the deliv-
ery pressure can be disrupted.
What to do?
● Open the combustion air slide valve complete.
● Only put on a small quantity of fuel.
● Frequently stoke the ash.
All manuals and user guides at all-guides.com
press here
Cladding
● The cladding may not be overheated, as cracks
could appear.
● Use a maximum of 3 kg wood or briquette for heat-
ing.
● As the natural cladding comes from a „grown" boul-
der, structure and colour scheme may be very dif-
ferent.
● The surface may be altered under temperature in-
Special information
The manufacturer's guarantee expires if the stove is
nominal heating output, or if fuels other than those list-
ed are used.
fluence.
● The stove must only be used with the combustion
chamber door shut.
proof, non-combustible container.
● Attention: The surfaces get hot! Always use the en-
closed glove when operating the stove.
significantly or permanently overloaded above the
● Convection air openings may not be covered.
tered. In particular, it must be ensured that any nec-
● Never remove hot ashes. Only store ashes in a fire-
place is being used.
stove.
● Never use white spirit, benzene or other inflamma-
ble, hazardous materials to ignite the fire.
● The combustion air supply fittings must never be al-
essary combustion air pies are open while the fire-
● Do not make any changes or modifications to the
21
Publicité
