Doro 610 Mode D'emploi page 7

PIN Number
The PIN number (four-digits) protects against unauthorised access of certain functions.
1. Press .
º
1
2. Enter the telephones PIN number (0000 when supplied). Press
3. Enter your new PIN number. Press
4. Enter your new PIN number again. Press
Paging
The handset will ring when
automatically after a while or if the
base unit is pressed.
Expanded system (
The base unit should be centrally positioned so that the area covered is roughly equal for
both handsets. The handset number is showed in the display in stand-by.
It is NOT possible to add additional handsets at a later time.
Intercom
1. Press and hold
2. Enter the handset number for the handset that you wish to call,
Should an external call come in while an internal call is in progress, a tone will be heard.
You must then terminate the internal call by pressing
external call.
Transferring calls/Conference between handsets
1. While an external call is connected on line.
2. Initiate an internal call as described above.
to transfer the call or press 5 for conference.
3. Press
q
on the base unit is pressed. The signal will stop
J
q
)
+1...
until the display shows
R
English
.
º
.
º
button on the handset or the
.
int
, press
q

.
º
button on the
J
- .
1 4
again to receive the
q