AVS Bugflector Instructions D'installation page 2

Installation Steps
Position hood shield on hood. Align (2) holes in hood shield with
the holes located in the underside of hood.
3
Insert fastener and secure using a phillips head screw-
driver. Repeat for opposite side fastener.
5
Close hood. Adhere bump ons.
7
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
4
Replace the front grill over the front flange of hood
shield and secure with previously removed nuts.
6
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
Assemble fasteners.