Publicité
Les langues disponibles
Les langues disponibles
syMBols
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
8 8
Indoor use only
Do not expose to rain or water
Do not burn
Do not dispose of batteries, Return
exhausted batteries to your local collection.
All manuals and user guides at all-guides.com
opeRaTinG insTRucTions
Intended use
The power tool is intended for driving in and
loosening screws as well as for drilling in
wood, metal and plastic.
1. Recharging batteries
a) Charging the battery
The battery charger supplied is matched to the
Li-ion battery installed in the machine. Do not use
another battery charger.
The Li-ion battery is protected against deep
discharging. When the battery is empty, the
machine is switched off by means of a protective
circuit: The tool holder no longer rotates.
In a warm environment or after heavy use, the
battery pack may become too hot to permit
charging. Allow time for the battery to cool down
before recharging.
When the battery is charged for the first time
and after prolonged storage, the battery will only
accept approximately 60% charge. However, after
several charge and discharge cycles the battery
will accept a 100% charge.
b) Important notes for charging the battery
The battery in your new Screwdriver is not charged
Note: Before using the tool, read the instruction
book carefully.
Publicité
