Dell PowerEdge 4220 Guide D'installation page 25

1 Using a screwdriver, lower the leveling foot until it rests on the floor.
2 If you need to lower the foot further, tighten the hex nut clockwise with a
3 Repeat steps 1 and 2 for the remaining leveling feet.
4 Ensure that the rack is level.
Figure 1-11. Adjusting the Leveling Feet
1
3
Get user manuals: See SafeManuals.com
12-mm wrench (see Figure 1-11).
leveling foot stem
leveling pad
2 hex nut
Installation Guide
1
2
3
23