Dell PowerEdge 4220 Guide D'installation page 20

i
j
4 Reverse the bottom hinge body.
a
b
c
5 Rotate the front door 180 degrees so that its hinge-pin housings are on
the right side (see Figure 1-8).
Figure 1-8. Rotate the Front Door
18
Get user manuals: See SafeManuals.com
Slide the hinge pin into the hinge body.
Insert the retention clip through the hinge so that the retention clip is
below the spring.
Remove the Allen bolts that secure the hinge body to the rack, and
place the bolts in a safe location.
Rotate the hinge body 180 degrees so that the hinge posts are now on
the right side of the hinge body (see Figure 1-7).
Locate the bottom bolt holes in the right side of the rack, and use
the Allen bolts to fasten the hinge body to the right side of the rack.
Installation Guide