Publicité
Les langues disponibles
Les langues disponibles
Connecting Other Components
Analog audio
cable (RCA)
e.g.,
cassette tape deck
About Connections
• Before making any connections, read the manuals
supplied with your other components.
• Don't connect the power cord until you've completed
and double-checked all connections.
Push plugs in all the way to make
good connections (loose connections
can cause noise or malfunctions).
Note:
• Do not put anything on top of the CD receiver, as it
may interfere with proper ventilation.
Connecting a Powered Subwoofer
Using a suitable cable, connect the CD receiver's
AUDIO OUT: SUBWOOFER to the input on your
powered subwoofer.
If your subwoofer is unpowered and you're using an
external amplifier, connect the AUDIO OUT:
SUBWOOFER to the amp's input.
Note:
• Do not connect or disconnect the power cord while the
subwoofer is powered-on. Doing so may damage the
subwoofer. You must power-off the subwoofer before
connecting or disconnecting the power cord.
Connecting an Audio Playback
Device
Using a suitable cable, connect the CD receiver's LINE
IN jacks to the OUTPUT (PLAY) jacks of your cassette
tape deck, TV, or other audio playback device.
16
En-
CD receiver
Powered
subwoofer
Right!
Wrong!
(Connector type varies from
country to country.)
Connecting the Power Cord
Connect the CD receiver's power cord to a suitable wall
outlet.
Note:
• Do not use any cord other than the included power
cord.
Do not connect the included power cord to any other
device. Doing so may cause malfunctions or
accidents.
• Do not unplug the power cord from the AC INLET
while the other end of the cord is still connected to an
AC outlet. You may receive an electric shock if you
accidentally touch the internal terminals of the power
cord.
• Before connecting the power cord, connect all of your
speakers and AV components.
• Turning on the CD receiver may cause a momentary
power surge that might interfere with other electrical
equipment on the same circuit. If this is a problem,
plug the receiver into a different branch circuit.
• Plug the power cord into an AC outlet that is easily
accessible so that you can quickly unplug it if
necessary.
To wall outlet
Publicité
Chapitres
Dépannage
