Télécharger Imprimer la page

Black & Decker SMS254 Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly using
power tools in employment, an estimation of
vibration exposure should consider, the actual
conditions of use and the way the tool is used,
including taking account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time.
Labels on tools
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Wear safety glasses or goggles.
Wear ear protection.
Wear a dust mask.
This product is not to be used by
children under 16.
Keep fingers and arms away from
rotational saw blades.
Wear gloves when handling saw
blades.
Laser radiation.
Do not look into the laser beam.
Do not use optical tools to view the
laser beam.
All manuals and user guides at all-guides.com
Electrical safety
the voltage on the rating plate.
Voltage drops
In-rush currents cause short-time voltage drops.
Under unfavourable power supply conditions,
other equipment may be affected.
If the system impedance of the power supply
Zmax<0.34, disturbances are unlikely to occur.
Using an extension cable
Features
1. Laser on/off switch
2. Main operating handle
3. On/Off switch
4. Motor housing
5. Moveable lower guard
This tool is double insulated; therefore
no earth wire is required. Always check
that the power supply corresponds to
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black & Decker Service Centre in
order to avoid a hazard.
Always use an approved extension cable
suitable for the power input of this tool (see
technical data). Before use, inspect the
extension cable for signs of damage, wear
and ageing. Replace the extension cable if
damaged or defective. When using a cable
reel, always unwind the cable completely.
Use of an extension cable not suitable for the
power input of the tool or which is damaged
or defective may result in a risk of fire and
electric shock.
ENGLISH
11

Publicité

loading