Publicité
Les langues disponibles
Les langues disponibles
3. For electric/recoil start models, put the key into the ignition switch, and turn the key to 'ON' position.
Diagram #56009
4. Turn the electric start key to "START" position and release when engine starts
5. Let the engine run for at least 5 seconds then move the choke switch to the run position
2. Recoil Pull Starting
1. Open gasoline switch
2. Place the key into the ignition switch, and turn the key to 'ON' position. For pull start only models
place rocker style ignition in the on position.
3. Pull the starting rope until feel the resistance, then pull briskly to start the engine.
Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter or housing.
NOTE: If the engine will not start, check the oil level, fill the engine with oil if
12
All manuals and user guides at all-guides.com
(only for electric/recoil and recoil start only models)
necessary and then re-try starting the unit.
Publicité
