Sony STR-AN1000 Mode D'emploi page 29

Connecting a TV compatible with the eARC or ARC function via an HDMI
connection
Connect your TV to the HDMI OUT A (TV) jack of the receiver.
With just one HDMI cable connection, you can listen to the TV audio from the speakers connected
to the receiver while the receiver sends audio and video signals to the TV.
 HDMI cable (not supplied)
Note
• To use your TV with this connection, you need to turn the eARC or ARC function on. Press HOME, then select
[Setup] – [HDMI Settings] – [Audio Return Channel] – [eARC] or [ARC].
• You also need to perform the setting on the TV menu. Turn on the eARC or ARC function.
Tip
If the HDMI jack of the TV (labeled "eARC" or "ARC") is already connected to another device, disconnect the
device and connect the receiver.
Audio/Video signals
29
EN