Klarstein CUCINATA 10034503 Manuel D'utilisation page 27

When the temperature is set:
1. Press the MENU button for the fourth time, the temperature indicator will light and
the display will show [0:00].
2. Use the UP/DOWN buttons to set the desired time in the range from 0:01-3:00
hours in 1-minute increments.
3. After setting the timer, wait until the display shows the preset temperature of
240 °C. Then use the buttons UP/DOWN to set the desired temperature.
(5) Switch off
1. When you have finished cooking, turn off the induction hob by pressing the ON/
OFF button. The display shows [H]. The fan will continue to run for a while to cool
the appliance.
2. When the fan is off, unplug the power cord and allow the unit to cool completely.
OPERATION OF THE BIG COOKING ZONE
(1) Switching on
1. After plugging the induction hob into the socket, you will hear a beep and [L] will
appear on the display.
2. Press the ON/OFF button. The display shows [ON].
3. The induction hob will detect whether you are using the correct cookware. If this is
the case, [ON] appears on the display. Press the MENU button and you can select
the cooking level. The hob turns on.
4. If you are using the wrong cookware, you cannot select a cooking level after
pressing the MENU button. You will hear a repeated signal and the [E0] warning
will appear on the display. The induction hob switches to standby mode after a few
seconds.
(2) Setting the Power Level
1. Press the MENU button and the power supply indicator [P] will light.
2. After power on, the power level is automatically set to 1600W.
3. Set the desired power level with the UP/DOWN buttons. The power can be set
from 200-1800 W in 10 steps.
EN
27