Klarstein CUCINATA 10034503 Manuel D'utilisation page 26

EN
26
OPERATION OF THE SMALL COOKING ZONE
(1) Switching on
1. After plugging the induction hob into the socket, you will hear a beep and [L] will
appear on the display.
2. Press the ON/OFF button. The display shows [ON].
3. The induction hob will detect whether you are using the correct cookware. If this is
the case, [ON] appears on the display. Press the MENU button and you can select
the cooking level. The hob turns on.
4. If you are using the wrong cookware, you cannot select a cooking level after
pressing the MENU button. You will hear a repeated signal and the [E0] warning
will appear on the display. The induction hob switches to standby mode after a few
seconds.
(2) Setting the Power Level
1. Press the MENU button and the power supply indicator [P] will light.
2. After power on, the power level is automatically set to 1200W.
3. Set the desired power level with the UP/DOWN buttons. The power can be set
from 200-1300 W in 10 steps.
(3) Setting the temperature
1. Press the MENU button twice and the temperature control lamp [C] will light up.
2. After switching on, the temperature is automatically set to 240 °C.
3. Use the UP/DOWN buttons to set the temperature. The temperature can be
adjusted from 60-240 °C in 10 steps.
(4) Setting the timer
When the power is set:
1. Press the MENU button for the third time, the power indicator will light and the time
control on the display will show [0:00].
2. Set the desired time in the range of 0:01-3:00 hours in 1-minute increments.
3. After setting the timer, wait until the display shows the default 1200W power
setting. Then use the UP/DOWN buttons to set the desired power level.