Publicité
Les langues disponibles
Les langues disponibles
SETTING PROCEDURES
The following pages describe setting operations from the camera.
For accessing from the PC, interpret these instructions as follows.
Function
Opening the camera setup menu
Closing the camera setup menu
Opening a more detailed setup
menu
Returning to the previous menu
Opening the special menu
Resetting the parameter of an item
Resetting all the settings
Selecting an item
Selecting a parameter
Validating the selection
Escaping from the VMD mask setup
etc.
■ Setup Selection
** SET UP **
CAMERA
NETWORK
END
SET UP DISABLE
1. Move the cursor to CAMERA or NETWORK, and
press [SET] to open the desired setup menu.
CAMERAN: Opens the CAMERA SETUP menu.
NETWORKN: Opens the NETWORK SETUP menu.
2. Move the cursor to END, and press [SET] to return
to camera image screen.
Note: When SETUP DISABLE appears in the bot-
tom line you cannot change the currently active
settings. This disablement is designed to pre-
vent accidental setting change. Refer to the pre-
vious page to change it to ENABLE.
All manuals and user guides at all-guides.com
From the Camera
Hold down the [SET] button for 2 seconds.
Press the [SET] button while the cursor is
at END.
Press the [SET] button while the cursor is
at an item tailed with O mark.
Press the [SET] button while the cursor is
at RET.
Hold down the [Left] and [Right] buttons
simultaneously while the cursor is at END
in CAM SETUP.
Hold down the [Left] and [Right] buttons
simultaneously while the cursor is at the
item.
Hold down the [Left], [Right], and [SET]
buttons simultaneously while the cursor is
at CAMERA RESET.
Press the [Up] or [Down] button.
Press the [Left] and [Right] button.
Press the [SET] button.
Hold down the [SET] button for 2 seconds.
-23-
Click the Camera Setup button in the
main page to display the menu control
buttons.
Click the [MENU ON] button.
Click the [MENU OFF] button.
Click the [SET] button while the cursor is
at the item tailed with O mark.
Click the [SET] button while the cursor is
at RET or simply clock the [ESC] button.
Click the [RESET/SPECIAL] button while
the cursor is at END in CAM SETUP.
Click the [RESET/SPECIAL] button while
the cursor is at the item.
Click the [ALL RESET] button while the
cursor is at CAMERA RESET.
Click the [ D ] or [ C ] button.
Click the [ A ] or [ B ] button.
Click the [SET] button.
Click the [ESC] button.
■ Camera Setup Menu (CAM
SETUP)
** CAM SET UP **
CAMERA ID
ALC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
MENU
RET
END
1. Camera Identification (CAMERA ID) Setting
You can assign a name to the camera. The camera ID
consists of up to 16 alphanumeric characters. The
camera ID display can be switched on and off on the
monitor screen.
Character Cursor
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
POSI RET END RESET
................
Cursor
CAMERA ID menu
From the PC
OFF
ALC
---
ON(DNR-H)
OFF
INT
ATW1
OFF
Character
Area
Command
Editing
Area
Publicité
