Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
A
1
-
Locator
2
-
Ramp-off sleeve
3
-
Belt clip
4
-
Bit storage
5
-
Lock button
6
-
Trigger
7
-
Forward/Reverse switch
Assembly
WARNING!
To reduce the risk of injury, always
unplug the tool before changing
accessories or making adjustments.
Use only specifically recommended
accessories. Other may be hazardous.
Removing
B
Quik-Lok
®
MILWAUKEE'S exclusive Quik-Lok
provide instant field replacement or sub-
stitution.
1.
To remove the Quik-Lok
cord nut 1/4 turn to the left and pull it
out.
2.
To replace the Quik-Lok
connector keyways and push the con-
nector in as far as it will go. Turn the
cord nut 1/4 turn to the right to lock.
Installing and Removing Bits
C
Drywall
Ramp-Off
Assembly
8 - Bit holder
9 - Insert bit
10 - Locator assembly
1.
Unplug tool. To remove locator assem-
bly, turn the sleeve while pulling it away
from the tool.
2.
Push insert bit into bit holder until it snaps
into place. Push the bit holder into the
nose of the tool until it snaps into place.
3.
Push the locator assembly onto nose
of tool until it snaps into place.
and
Replacing
Cords
®
Cords
®
Cord, turn the
®
Cord, align the
Locator
Installing and Removing Bits
D
TEKS
®
Ramp-Off Locator Assembly
11 - Magnetic socket
12 - Locator assembly
1.
Unplug tool. To remove the locator as-
sembly, turn the sleeve while pulling it
away from the tool.
2.
Pull out the magnetic socket and re-
place with a new socket.
3.
Push the locator assembly onto the nose
of the tool until it snaps into place.
Adjusting Locator Assembly
Drywall Ramp-Off Locator Assembly
and TEKS
Ramp-Off Locator Assembly
®
The locator assembly controls the tool's
driving depth. These screwdrivers feature
a ramp-off locator assembly with one-
handed depth adjustment. Depth adjust-
ments can be made easily and quickly by
turning the locator with one hand. Detents
inside the sleeve "lock" the selected depth.
For the drywall ramp-off locator assem-
bly, start with about 1,5 mm clearance be-
tween the head of the screw and nose
with the clutch disengaged as shown. For
both the drywall and TEKS
blies, the detents on the inside of the sleeve
represent different depths. Every two
clicks of the locator equal 0,4 mm. Con-
tinue adjusting the locator to the desired
depth.
13 - Deeper depth setting
E
14 - 1,5 mm clearance
(For drywall applications only)
1.
To increase the driving depth, simply
rotate the locator in the direction shown
(13).
2.
To decrease the driving depth simply
rotate the locator in the opposite direc-
tion. Detents "lock" the locator in place,
ensuring an accurate depth setting.
3.
To remove the ramp-off locator assem-
bly, turn the sleeve while pulling it away
from the tool. Reattaching the locator
assembly does not alter the depth
setting.
3
locator assem-
®
English
Publicité
