KitchenAid Artisan 5KSM125 Manuel D'utilisation page 16

USING THE STAND MIXER
PLACING/REMOVING THE POURING SHIELD*
To place pouring shield: Turn speed
control to "0". Unplug Stand Mixer.
1
Attach your chosen accessory. See
"Attaching/removing the flat beater,
wire whip, or dough hook" section.
To remove pouring shield:
3
Turn speed control to "0".
Unplug Stand Mixer.
* Included with select models only. Also available as an optional accessory.
16 | USING THE STAND MIXER
W10863290A_01_EN_v06.indd 16
All manuals and user guides at all-guides.com
2
4
From the front of the Stand Mixer,
slide the pouring shield over the
bowl until the shield is centered. The
bottom rim of the shield should fit
within the bowl.
Lift the front of the pouring shield
clear of the bowl rim and pull forward.
Remove attachment and bowl.
3/30/16 11:18 AM