VERSACE ISA 8176 Mode D'emploi page 18

QUARTZ CHRONOGRAPH VEM 927/VEM 921 (INDIGLO)
Before being able to time, the hands of the chronograph must be at the initial position
(see setting the counters to zero).
a)
to start timing with the chronograph
Press it again to measure the time elapsed and a third time to start timing again.
In this way you can add various timings at different intervals.
b)
to set the chronograph to zero
The counter hands will move back to the initial position.
* vem 921 indiglo electroluminescent technology – illuminates the dial at
night and in low light conditions.
1 /
to illuminate the dial
2 / -
to use night mode feature
in for 4 seconds. Pressing any pusher will cause the INDIGLO night-light to stay on for 3
seconds.
NIGHT-MODE feature will last for 8 hours. Push and hold crown in for 4 seconds to deac-
tivate this feature.
20
: press button A.
: simply press button B once.
: with the crown in the I position, push the crown in.
: to activate NIGHT-MODE feature, push and hold the crown
18