System Requirement - Sharp Aquos Board 4T-B70CT1U Guide De Configuration

Computer connection
• HDMI1 / HDMI2
Use a commercially available HDMI cable (conforming to the HDMI standard) that supports 4K.
• TOUCH PANEL terminal
Connect with the supplied USB cable between the computer's USB port and TOUCH PANEL
terminal on the monitor. The terminal on the monitor is a USB Type-C connector.
 Connected equipments
Hardware
Operating System
 Supplied software (Windows
CPU
Video Output
Memory
Free space on hard drive
To use the touch panel, connect the USB cable (supplied) to your computer.
The touch panel operates with the standard driver of each operating
system. On the Mac, operation is only possible in mouse mode.
Install Pen Software from the supplied USB drive.
When the Information Display Downloader is installed, you can check and download the most
recent versions of the software programs. To install the software, see the manual for each.
Using touch function

System Requirement

Must have a USB 2.0 compliant port.
Windows 8.1 ® (32-bit or 64-bit version), Windows 10
macOS v10.13, v10.14, v10.15
®
Google Chrome™ OS Version 74 or later
)
®
Intel ® Core™ i5-6360U or faster
Intel Core™ i7-6650U or faster recommended
®
Must be capable of output at a Vsync of 60 Hz or higher
At least 4 GB
At least 5 GB (free space separately required for data storage)
- 6 -
® (32-bit or 64-bit version)