Sharp Aquos Board 4T-B70CT1U Guide De Configuration page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fi re or shock hazard, do not expose this product to dripping or splashing. No objects fi
lled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings
may result in fi re or electric shock. Exercise special caution when using the product around
children.
Precautions when transporting the interactive display (For SHARP dealer and service engineers)
• When transporting the interactive display, never carry it by holding or otherwise putting pressure
onto the display. Be sure to always carry the interactive display at least by two people.
Do not install the interactive display in a location in which it will be subject to water
drops such as underneath an air conditioning unit or in the vicinity of a humidifier.
• Water drops falling onto the interactive display and water
entering inside it may result in fi re, electric shock, or
malfunctions.
• We recommend that you install the interactive display at least
3.3 ft (1m) away from the outlet of an air conditioner.
Caring for the cabinet
• Use a soft cloth (cotton, fl annel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or
cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, fl annel, etc.) soaked in neutral detergent diluted with water
and thoroughly wrung out, and then wipe with a soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time.
Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.
Caring for the front panel
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.).
To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry
sheet type cloth, etc.). This may damage the surface of the front panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty.(It may scratch the
surface of the front panel when wiped strongly.)
• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths
are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs.
Call 1-877-PRO-ADV1 (1-877-776-2381) for ordering, or VISIT http://www.sharpusa.com.
Especially for child safety
– Don't allow children to climb on or play with the monitor.
– Don't place the monitor on furniture that can easily be used as steps, such as a chest of drawers.
– Remember that children can become excited while watching a program, especially on a "larger than life"
monitor. Care should be taken to place or install the monitor where it cannot be pushed, pulled over, or
knocked down.
– Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or
grabbed by curious children.
More than 3.3 ft (1m).
- 13 -

Publicité

Table des Matières
loading

Table des Matières