Bertazzoni P604I1B26NV Manuel D'installation Et D'utilisation page 41

Installation
Choosing installation equipment
Cut out the work surface according to the sizes shown in the drawing.
Leave a space of at least 5 cm around the hole for the purpose of installation and use.
Make sure the work surface is at least 30 mm thick. Please select a heat-resistant work
surface material to avoid extensive deformation due to the heat radiated by the hotplate. As
shown below:
L(mm) W(mm) H(mm)
590 520 60
D(mm) A(mm) B(mm)
55 560 490
17
X(mm)
50 min.