Télécharger Imprimer la page

SilverCrest SFE 450 C1 Mode D'emploi page 32

Masquer les pouces Voir aussi pour SFE 450 C1:

Publicité

Les langues disponibles

Les langues disponibles

Assembling and operating the
appliance
• Thoroughly clean all component parts as descri-
bed in the section "Cleaning and care" before
using the appliance for the first time.
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
- to the left, the container for fruit pulp and
s
vegetable mash
- to the right, the outlet pipe for the juice
Warning:
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice container
u
base
, so that the three detents and the juice
y
outlet
are securely engaged in the recesses.
d
2. Place the filter
on the drive shaft
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
3. Slide the container for fruit pulp and vegetable
s
mash
from below under the ejection shaft
(see fold-out page).
4. Place the housing lid
so that the loading shaft
above the cutters in the filter
5. Ensure that the housing lid
the recesses of the juice container
r
clasps
and clip them into the notches on the
e
housing lid
.
6. Press the lower part of the claps
appliance until they engage.
o
,
.
y
t
on the appliance
f
and press
e
on the juice container
w
is seated
d
.
e
is seated firmly in
t
. Lift the
r
ragainst the
7. Push the foam separator plate in the separate
juice collector
the separate juice collector
ance so that the juice outlet
juice collector
8. Insert the power cable with plug
socket.
Preparing the fruits/vegetables
• Important: Use only well ripened fruit, as other-
wise the filter
This would require repeated cleaning of the
d
filter
.
.
• Wash or peel the fruits/vegetables that you wish
to process.
• Large seeds or stones should always be removed
before filling the appliance.
• Stone fruit (such as apples, pears) can be pro-
cessed with the skin and seed centres. Remove
all other stones (peaches, plums etc.), all large
seeds (melons etc.) and stalks to avoid possible
damage to the appliance.
• Fruits and vegetables with thick peels (e.g. citrus
fruits, melons, kiwis, beets) must always be peeled
first.
• The main stalk is to be removed from grapes.
• Cut the fruit or vegetables into pieces that are
sized to fit into the loading shaft
Note:
t
Raisins are not suitable for juicing as they contain
too little juice. Rhubarb or other fibrous vegetables/
fruits are not suitable for juicing as the fibres block
the juice extractor.
- 29 -
h
and then put the lid on. Place
h
next to the appli-
y
projects into the
h
.
i
d
could become quickly blocked.
w
.
into the wall

Publicité

loading