Husqvarna K 770 Dry Cut Manuel D'utilisation page 4

Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always use approved personal protective
equipment. Refer to
equipment on page 6 .
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
instructions in the manual before using the
product. Refer to
WARNING! Sparks from the cutting blade
can cause fire in combustible materials such
as: petrol (gas), wood, clothes, dry grass,
etc.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw blades.
WARNING! Do not use bonded abrasive
blades.
WARNING! For dry cutting only.
Use diamond blades only.
Choke
Air purge bulb
4
Personal protective
Kickback on page 10 .
Decompression valve
Starter rope handle
Use a fuel mixture of gasoline and oil.
Underwriters Laboratories Inc. (UL) has UL
listed this machine as compliant to ANSI
B175.4 US Safety standard.
ANSI B175.4-2013
Cutting equipment decal
A
A: Cutting blade diameter.
B: Maximum speed output.
C: Maximum blade thickness.
D: Bushing dimension.
Note: Other symbols or decals on the product refer to
certification requirements for some markets.
EPA
C
D D
B
861 - 004 - 27.02.2019