Optika Italy B-380 Serie Manuel D'instructions page 26

12. Fluorescence reflected light observation procedures (B-383FL)
Set the power supply switch to "I" (ON) and
wait for the arc to stabilize (5 or 10 minutes).
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
Adjust until you obtain a bright and even field of view
Insert the shutter when the microscope is
13. Fluorescence reflected light observation procedures (B-383LD)
Turn the microscope main switch to "II" (ON).
Place a specimen on the stage.
Insert the filtercube in the light path
Insert the objective into the light path
and focus the specimen.
not used for a short time
Begin observation
Begin observation
(Used commands)
Fluorescence power supply
Slide holder
Fluorescence filter slider
Shutter
Nosepiece
Coarse and fine focusing knobs
Lamp housing focusing and centering
screws
Shutter
(Used commands)
Main switch
Slide holder
Fluorescence filter slider
Nosepiece
Coarse and fine focusing knobs
Page 26
(Chapter)
14
10
14
14
7
7
14
14
(Chapter)
10
10
14
7
7