Commissioning, Operation; Mechanical Mounting - WIKA O-10 Mode D'emploi

6. Commissioning, operation

6. Commissioning, operation
CAUTION!
Prior to commissioning, the pressure transmitter must be subjected to a visual inspection.
Leaking fluid is indicative of damage.
■
Only use the instrument if it is in perfect condition with respect to safety.
■
The pressure transmitter must not be exposed to any condensation.

6.1 Mechanical mounting

Required tool: open-ended spanner (spanner width 24)
During mounting, make sure that the sealing faces at the pressure
■
transmitter and the measuring point are clean and undamaged.
Only ever screw in, or unscrew, the instrument via the spanner flats.
■
Never use the case as a working surface.
The correct torque depends on the dimensions of the process
■
connection and the sealing used (form/material).
When screwing in, do not cross the threads.
■
For information on tapped holes and welding sockets, see Technical Information IN 00.14 at
■
www.wika.com.
WIKA operating instructions pressure transmitter model O-10
GB
Spanner flats
15