Télécharger Imprimer la page

Before You Begin; Tools Needed - RDI METALWORKS EXCALIBUR Instructions D'installation

Masquer les pouces Voir aussi pour METALWORKS EXCALIBUR:

Publicité

Les langues disponibles

Les langues disponibles

WARNING:
• Always wear safety goggles
• Read all instructions prior to installing product.
• Refer to local building codes for installation requirements; failure to install this product in accordance
with building codes may affect safety of the product and void product warranty.
• Refer to manufacturers safety instructions when operating any tools.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store. For assistance or replacement parts call: 1-877-265-2220.

BEFORE YOU BEGIN:

It is the responsibility of the installer to
meet and/or exceed all code and safety
requirements and to obtain all required
building code permits.
The deck and railing installer should
determine and implement appropriate
installation techniques for each installation.
FASTENERS NEEDED:
Depending on Installation Method (Sold Separately)
⁄ " Diameter Galvanized Bolts with
3
3
3
8
8
Washers and Nuts (For Deck/Wood)
⁄ " Masonry Anchors (For Concrete)
3
3
3
8
8
#10x3
⁄ " Deck Screws (For Deck/Wood)
1
1
1
2
2
Post Kit
Components:
Description
Post, with Welded Base Plate
Pyramid Post Top
2 Piece Base Trim
Bracket Covers
Shims
To obtain and review a copy of the warranty please visit: barretteoutdoorliving.com. You may also contact us at
1-877-265-2220 or email Cs.outdoorliving@barretteoutdoorliving.com
2
Rail Kit
Components:
Description
Factory-Welded Rail Panel

TOOLS NEEDED:

Safety Glasses
Pencil
Level
Chalk Line
⁄ " &
⁄ " Drill Bits
7
7
7
1
1
1
16
16
8
8
Drill
Hacksaw or Chopsaw*
Tape Measure
Scissors or Utility Knife
Tape
Rubber Mallet
Clamps
Fine-tooth Carbide Blade*
Deck Board
(For Stair Rail Spacing)
2"x8" Wooden Blocks
(For Post Support)
Paintbrush
Touch-up Paint
*If using a chopsaw, use a ne-tooth carbide
blade.
** For SATIN BLACK touch-ups, we
recommend Rust-Oleum®*, Satin Canyon
Black, Color Code 249844. For BRONZE
touch-ups, we recommend Rust-Oleum®*,
Hammered Brown, Color Code 210880.
Stair Rail Kit
Components:
Description
Factory-Welded Stair Rail Panel

Publicité

loading

Produits Connexes pour RDI METALWORKS EXCALIBUR