Klarstein Kamini FX Manuel D'utilisation page 10

EN
12
INSTALLATION
You can install the fireplace as follows:
• In an existing chimney or enclosure.
• Freestanding on a heat-resistant base.
Note: For the unit to operate as efficiently as possible, do not place it in direct
sunlight.
Operation
• Remove all packing material.
• Place the appliance on a level, stable surface and insert the plug into the power
outlet.
• When not in use, turn the appliance off and unplug the power cord from the wall
outlet.
Control panel
Control of the heating system
(1) Use the On/Off switch to activate and deactivate the flame effects.
(2) Switching on heating element 1
(3) Connecting heating element 2
(4) Adjust the temperature level with the thermostat control: LOW - MED - HIGH - OFF
Note: When the thermostat control is in the OFF position, the heating function is
switched off.
Thermostat