Festo SBO Q Serie Notice Simplifiee page 22

Power supply and digital I/Os
M12 plug
1) Core colours of the original cable SIM−M12−8GD−...−PU
2) The signal levels/edges can be configured via the system parameters.
The given description corresponds to the standard configuration.
3) The function can be configured via system parameters. The given
description corresponds to the standard configuration.
4) Connect the cable screening with low impedance to the earth potential.
22
Pin Description
2)
1 I0 : Trigger signal
2 + 24 V DC (tolerance: ±10%)
3 Reserved (do not connect)
4 O1: Last evaluation resulted in
good part
5 I1: Accept input signal and ac
knowledgement in event of error
6 O0: Ready
1 signal: Device ready to
operate
0 signal: Device not yet ready
to operate (e.g. initialization
running, system error)
7 0 V
8 O2: Last evaluation resulted in
reject part
Metal covering: Screening (shield)
3)
3)
4)
Festo P.BE−K−SBO−Q 0809b English
1)
Colour
white (WH)
brown (BN)
green (GN)
yellow (YE)
grey (GY)
2)
pink (PK)
blue (BU)
red (RD)