Kohler Composed 103C37-SANA-CP Instructions D'installation page 9

Power
Cord
6. Install the AC Single Supply
IMPORTANT! Verify that you are following the correct power
system installation based on your model number. For a multi-output
AC supply power unit installation, refer to "Install AC Multi-Output
Supply". For a hard wire power installation, refer to "Hard Wire
Installation".
Unthread the control box screws to remove the control box cover.
Connect the power cords.
Plug the AC supply into the wall outlet.
Secure the excess wire under the counter.
Secure the control box cover to the control box.
IMPORTANT! The area in front of the sensor must be free of
objects during the 2 minute learning cycle or the faucet may not
function properly.
Allow 2 minutes for the sensor to cycle through the automatic
sensing distance.
Kohler Co.
AC Supply
9 1377340-2-A