Kohler Composed 103C37-SANA-CP Instructions D'installation page 6

2-Pin
Sensor
Cable
Spout
Wires
Valve
Box
3. Connect the Control Box
IMPORTANT! The control box cover has slots for the spout wires
to fit. Verify that the wires are not pinched when installing the
cover.
Connect the 3-pin sensor cable from the valve cover to the 3-pin
sensor cable from the spout (red, white, and green cables).
Connect the solenoid cable from the valve cover to the solenoid
cable from the valve box (red and green cables).
Connect the 2-pin sensor cable from the valve cover to the 2-pin
sensor cable from the spout (orange and black cables).
Loosely secure the cover to the control box for future access.
1377340-2-A
3-Pin
Sensor
Cable
Power
Solenoid
2-Pin
Cable
Cable
Sensor
Cable
3-Pin
Sensor
Cable
Solenoid
Cable
6
Valve
Cover
Power
Cable
Kohler Co.