Goetze 451r Instructions De Montage, D'utilisation Et D'entretien page 13

9
Warranty
The bursting disc/safety valve combination has been checked before leaving the
factory. For our products, we guarantee that we will be repair, free of charge, parts
which are proven to have become unusable prematurely due to material or manufac-
turing defects. We do not accept claims for damages or other similar obligations. The
factory guarantee will not apply in the event of damage to the factory seal, improper
handling and/or installation, non-observance of these assembly, maintenance and
operating instructions, contamination or normal wear and tear.
10
Marking
In addition to labelling of the individual components in accordance with:
• DIN EN ISO 4126-1 for the safety valve
• DIN EN ISO 4126-2 for the bursting disc
The combination is also labelled as follows in accordance with DIN EN 4126-3:
• Designation of the BD/SV combination: 451r
• Number of the standard: DIN EN ISO 4126-3
• Serial number of the combination
Further data can be found on the nameplate of the individual fitting and are listed
in the respective maintenance and assembly instructions of the safety valve and/
or bursting disc.
Assembly and maintenance instructions - 451r / 851r | Version: 09/2022 · V01 www.goetze-group.com