Greenlee GATOR EK1550FLX Manuel D'instructions page 5

• Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
• Power tools are dangerous in the hands of
untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe
handling and control of the tool in unexpected
situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of BATTERY pack may create a risk of fire
when used with another BATTERY pack.
• Use power tool only with specifically
designated BATTERY packs. Use of any other
BATTERY packs may create a risk of injury and
fire. When BATTERY pack is not in use, keep it
away from other metal objects, like paper clip,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the BATTERY
terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be
ejected from the BATTERY; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the BATTERY may cause
irritation or burns.
• Do not use a BATTERY pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, EXPLOSION or risk of injury.
• Do not expose a BATTERY pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 265°F (130°C) may cause
explosion.
52080019 REV 05
15 Ton Battery-Powered Crimping Tool
• Follow all charging instructions and do not
charge the BATTERY pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
* The text used in the General Power Tool Safety Warnings section of this manual
is required from the applicable EN 62841-1 standard to which this tool is tested.
This section contains general safety practices for many different types of power
tools. Not every precaution applies to every tool, and some may not apply to this
tool.
© 2022 Greenlee Tools, Inc.
5