Inglesina DARWIN NEXT STAGE i-SIZE Manuel D'instructions page 33

fig. 22 Important: never pull the harness by gripping it from the shoulder straps.
fig. 23
Pressing the red button (B3), release the central buckle.
fig. 24
For an easier positioning of the child in the car seat, the harness can be
moved apart and locked outside the seat, fitting both ends (S7) in the dedicated loop
(S8).
fig. 25
Place the child in the car seat with back and legs fully touching the car seat.
fig. 26
The harness and headrest can be adjusted in 4 positions simultaneously to
adapt to the growth of the child.
fig. 27
For correct adjustment, the harness must pass at the level of the child's
shoulders.
Caution: the shoulder belts must not run behind the back of the child or at ear
height or above the ears.
fig. 28 To adjust the height, move the adjustment lever (A1) and accompany it to
the wished position as shown by the locking click.
fig. 29
The head hugger should never be placed too high or too low with reference
to the child's shoulders.
fig. 30
Overlap the two ending parts (B4) and insert them in the buckle until
hearing the blocking Click. Verify the correct closing by pulling the ends of the belts.
fig. 31
Let the belts adhere to the child's body, by pulling its end on the regulator
(B5). A finger should not pass between the belts and the child's body. If the harness
must be loosened, use the release button (B1) and adapt it around the child making
sure it is not too tight.
fig. 32
To release the belts, press the red button (B3). In order to ensure the best
possible protection and safety, check and adjust the height of the head hugger and
the position of the harness periodically to adapt them to your child's growth.
RECLINING THE CHILD CAR SEAT
fig. 33
The Darwin Next Stage i-Size car seat can be reclined in 4 positions, either in
the forward facing or rearward facing position.
fig. 34
Using the lever (F), recline the child seat to the desired position.
CARE AND MAINTENANCE
• It is recommended to remove the lining periodically to provide for its correct
maintenance.
fig. 35
To make it easier to remove the textile lining, move the head hugger to the
highest position.
fig. 36
Remove the lining from the headrest (A2).
fig. 37
Take out the textile lining from the structure releasing the attachments (G1)
from the side housings and remove the crotch strap (B6) from its protection.
Caution: always relocate properly the textile lining and all its components before use.
AVERTISSEMENTS
• LIRE LES INSTRUCTIONS SUIVANTES
ATTENTIVEMENT AVANT UTILISATION ET
LES CONSERVER POUR LES BESOINS
ULTÉRIEURS DE RÉFÉRENCE. IL EST ESSENTIEL
33